Commitment and Environmental Policy

An environmental policy is a statement of the organization’s overall aims and principles ofaction with respect to the environment, including compliance with all relevant stakeholders. As such, it should be written clearly and concisely to enable a
regulatory requirements. It is a key tool in communicating the environmental priorities of your organization to employees at all levels, as well as to external layperson to understand it, and should be made publicly available. It is up to the organization to decide on environmental priorities based on an initial environmental review, but these choices should be justified in the policy. To be truly effective the policy should regularly be reviewed and revised and incorporated into the organization’s overall corporate policy. The policy statement should set in writing a few achievable quantifiable priorities related to the environmental management system and the significant environmental effects found at the work-site. Furthermore, EMAS requires that the most signifcant environmental effects be mitigated within three years. Some form of improvement must also be accomplished from year-to-year by the organization and must be shown in the annual reports.

Although the formulation of policies and clear priorities is the most important step of
environmental management, this step is often neglected. Many top managers feel pressure to do something for the environment and thus embark on some form of ?Environmental activism?E often containing many isolated activities but no clear direction. For an organization to be a credible and efficient environmental performer and to reap the benefits of being an environmental leader in its markets, the rationale for investing in environmental management must be very clear.

To ensure an organization’s commitment towards a formulated environmental policy, it is
essential that top management is involved in the process of formulating the policy and of setting priorities. Therefore the first step is to get the commitment from the highest level of management. Based on this commitment the organization should then conduct an initial environmental review and draft an environmental policy. This draft should be discussed and approved by the board of directors. Finally, the approved environmental policy statement must be communicated internally and made available to the public.

As the environmental policy establishes an overall sense of direction and sets the principles
of action for an organization, it requires commitment from the highest level of management. Top management should be involved in the development and adoption of an environmental policy.

Getting the commitment from the highest level should be argued on the basis of costs and the implementation of an EMS increases shareholder value it is easier for top
benefits and their impact on shareholder value. If management to commit themselves to approving an environmental policy and to implementing an environmental management system. This commitment includes three basic policy statements:
Continuous improvement in environmental performance
Compliance with environmental regulations



Maintaining public relations regarding environmental issues of the organization, its activities, products and services.

The central focus of the policy should be a commitment to continuous improvement. This

means improvement in the EMS itself and a decrease in environmental impacts caused by an organization’s activities, products and services. It is important for businesses to show improvement over time, both in environmental performance and in organizational commitment to this path.

A commitment to comply with at least local environmental regulations is a minimum
requirement for all of the environmental standards. However, multinationals operating in various environments and facing different laws in each, should think about which laws to abide by and if it is feasible to adopt the same standard worldwide. Generally, laws in newly industrializing countries are lax as compared to industrialized countries. However, given the increase in interest in environmental issues in these industrializing countries and the possible impact of the ISO 14000 series, it may be sound practice to adopt the more stringent laws in worldwide operations, where it is feasible to do so. In addition, the adoption of high standards worldwide can yield other benefits, such as an improved public image or easier technology transfer between different sites.

Companies should guard against going overboard in fulfilling environmental policies. Limits
are in fact set on how far a company has to go to reduce its environmental impacts. Reductions do not have to exceed levels which can be achieved by economically viable application of the best available technology (BAT).
Comments (0)
The Development of EMS Standards
Posted by everise iso 14001 Sunday 23 August 2009 1:41 am
The world’s first standard for environmental management systems (EMS) – BS 7750 – wasdeveloped and published by the British Standards Institution (BSI) in 1992. This standard was the model for the ISO 14000 Series developed by the International Organization for Standardization (ISO). ISO 14001, which establishes the requirements for an EMS, was finalized in 1996. BS 7750 was also the basis for the European Union’s Eco-Management and Audit scheme, known as EMAS.
ISO is an international standard and therefore must incorporate the different interests ofmany countries. This standard clearly has the weakest requirements. By contrast, EMAS is the most stringent and detailed standard reflecting the high environmental standards of German interests and companies which played a key role developing it.
Because ISO 14001 and EMAS are both based on BS 7750, all three standards arequite similar in their approach. If your organization complies with BS 7750 today, little effort will be needed to fullfill the requirements of ISO 14001 or EMAS. Be aware however, that EMAS emphasizes public environmental reporting.
Today there are two major areas in the evaluation of environmental management practice.One area focuses on organizational issues, and the other on products, services and processes.

1. Organization Evaluation
a. Environmental Management Systems (ISO 14001, 14004)
b. Environmental Performance Evaluation (ISO 14014, 14015, 14031)
c. Environmental Auditing (ISO 14010, 14011, 14012, 14013, 14014)

2. Products, Services and Processes

a. Life Cycle Assessment (ISO 14040, 14041, 14042, 14043)

b. Environmental Labeling (ISO 14020, 14021, 14022, 14023, 1402X)

c. Environmental Aspects in Product Standards (ISO 14060)
Comments (0)
ISO 14000 – Environmental Program Management
Posted by everise iso 14001 Friday 21 August 2009 11:07 pm
The ISO 14000 series of standards has
received widespread attention, and, like ISO 9000, it is becoming a requirementfor domestic and global organizations.
This document is intended to provide a
baseline understanding of the ISO 14000 standards and to discuss the current status of this important standard.
The International Organization for Geneva, Switzerland, is composed of 92 European Union (EU) to establish universal quality standards. Over time, ISO
Standardization (IOS), headquartered in member countries. Adherance to standards developed by the IOS is voluntary. However, countries and industries may adopt the IOS standards. Until approximately 15 years ago, IOS focused on traditional standards-setting activities. In 1987, IOS published the ISO 9000 series standards that were used with the 9000 became recognized as a positive indicator of quality and a prerequisite to establishing/maintaining business relationships within and outside the European Union.
In the United States, both the American
National Standards Institute and the American Society of Quality Control are privately funded organizations that have adopted ISO 9000, Quality Management, and the ISO 14000 standards.
ISO 14000 is the generic title given to 14040, ISO 14041, and ISO14050 have
the 14000 series of standards. ISO 14001, ISO 14004, ISO 14010, ISO 14011, ISO 14012, ISO 14020, ISO been published as international standards. The ISO 14000 series of standards consists of the following 18 subjects that can be grouped under two major headings:
14001 Specification with Guidance for Use
14004 General Guidelines on Principles,
14010 General Principles of Environmental Auditing
14011 Audit Procedures
14012 Environmental Auditing ? Qualification Criteria
14015 Environmental Site Assessments
14031 Evaluation of Environmental Performance ? Guidelines
14032 Evaluation of Environmental Performance ? Case Studies
14020 Goals and Principles of All Environmental Labeling
14021 Environmental Labels and Declarations ? Terms and Definitions
14024 Environmental Labels and
14025 Type III Labeling
14040 Life Cycle Assessment ? Principles and Framework
14041 Life Cycle Assessment ? Inventory Analysis
14042 Life Cycle Assessment ? ImpactAssessment
14043 Life Cycle Assessment ? Interpretation
14048 Life Cycle Indicator Format
14050 Guide on the Principles of Terminology Work

At the current time, the ISO 14000 as International Standards are referred to
Standards that have not been published as Draft International Standards (DIS). Most DIS are in the final review period before publication. If a particular standard is of interest and is not final, a copy of the DIS may be available for review.